A long-handled L-shaped wrench for installing and removing crank bolts with an 8mm socket. Make from industrial grade Bondhus Protanium high torque steel. "Speed Bearing" attachment for quick installation and removal of long threaded bolts.

The CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts, including the Campagnolo® chainring nuts.

The CCW-5 features both a 14mm socket and 8mm hex wrench on a long, comfortable handle.

The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Our unique “floating tip� ensures smooth operation and long life. Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles. Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt.

NOTE: For cranks using the ISIS Drive or Octalink system, use the CCP-44 or the CWP-7.

The CCP-44 Crank Puller is specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a “self extracting� system. It uses a long, comfortable handle. The 22 x 1 mm fine thread provides leverage needed to remove tight crank arms. Now with a stronger rotating tip system to ensure smooth operation and long life.

NOTE: The CCP-44 is used on cranks using crank bolts larger then 8mm threading. ISIS Drive and Shimano Octalink may use either 12mm or 15mm bolt thread. "Power Spline" cranks use an 8mm bolt (not wrench size, bolt thread size) and use the CCP-22 for removal.

For cranks using either a square spindle or an 8mm threaded bolt use the CCP-22 or the CWP-7.

The universal design of the CWP-7C has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms. The CWP-7 is made for the 22 x 1mm threading in the common cranks.

The BBT-9 is used to remove and install Shimano® Hollowtech II, Campagnolo Ulta-Torque, Race Face, FSA®, SRAM®, Truvativ®, Chris King®, and many other external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap.
The BBT-9 also fits the rotor disc lockrings using 16 external notches.

Don't see what you want here. Cycle Path can special order several other makes and models of tools.

Cycle Path can special order from several manufacturers of tools including but not limited to:

Pedro's Tools

Park Tools

Feel free to email us or stop in and let us know what you want.

Special order tools usually arrive within a week.